V3.01.51
15
generated by WiZARD2.42.
Many ISP’s block port 25 in
order to block spam. This does not apply in all cases. If you
do not receive email/text notification of alarm conditions and
you receive an error message such as:
“The message was
unable to deliver to (target email address) due to email
exception. The IP you are using to send mail is not
authorized. . .”
, then you will need to contact your internet
service provider for their socks proxy server address. This is
a non-dynamic IP address. Once you have been given an
IP Address go to: Tools, System Settings. A box for Mail
Server IP Address is located at the bottom of the System
Settings window.
(ii) Contact your IT administrator. Some administrators tightly
control the type of emails that can be sent/received by the
server.
b)
Secure Login / Time Out
i) WiZARD2.4
administrator can create user login ID’s and passwords.
ii) Go to Tools, Login Admin to create, change and delete user logins.
iii) User Level:
(1) Administrators can add and edit Loggers and Repeaters.
(2) Standard Users can only view settings and logged data.
c)
Encrypted Database
i) The WiZARD2.4 database is the location where all logged data is
stored. Once logged data is sent by the Logger, the saved logged data
can not be modified or deleted.
ii) Regular database backups are recommended to ensure that saved
logged data is not lost. See section 12 for backup instructions.
d)
Audit Trail
i) An encrypted log file keeps a record of all user logins and activity while
working in WiZARD2.4. This file is updated automatically and can not
be turned off.
ii) The audit trail can be found in Tools, View Audit File
e)
Logger Validation
i) All graphed and tabular data is stamped with the logger serial number
and all data points are marked as either valid (Y) or in-valid (N).
ii) A logger that is out of calibration is considered In-Valid.
iii) Loggers calibrated via SW400 software can not be validated and are
therefore invalid.
