V3.01.51
13
NOTE: If the Sample Rate, Connect Via or Status fields were not
changed, clear the logger either via USB or wirelessly to reset
logger time.
9)
21CFR11 WiZARD2.4 Secure Features (WR425 only)
a)
Setting Up Email/Text Alerts
i) This feature will generate email/text alerts for a given Logger when any
one of the selected alarm conditions is met: Max Alarm, Min Alarm,
Lost Communication, Low Battery, and Calibration Due.
ii)
Step 1: Unblocking Port 25 (Not Required for Windows 7)
Text/Email messaging requires that Port 25 be unblocked. This
feature is controlled by the PC’s virus scan software.
(1) To unblock Port 25 contact your IT manager or try the following:
(a) Right click on your Virus Scan icon in your task bar, and then
select Virus Scan Console.
(b) Then select Access Protection by double-clicking, then uncheck
Prevent mass mailing worms from sending email (Port 25) from
the access protection properties window.
(2) Please create this account in you mail server so that it will be a
valid email address in their server:
(3) You are now ready to set up text/email addresses
iii)
Step 2: Setting Up Text/Email Addresses:
(1) In WiZARD2.4 Go to Tools, Email/Text Admin. The Email/Text
Account window will open
(2) Select Type: Email or Text
(a) Email
(i) Enter complete email address
(ii) Description allows for further identification of who the email
address belongs to.
(iii) Click on Save to add
(iv) Click on Add New to add another email or text address or
close the window when done
(b) Text
(i) Enter complete cell phone number. 1 before the area code
is not required.
(ii) From the drop down box on the right, double click on the cell
phone service provider for the cell phone number. NOTE: If
the provider is not listed, go to their website to see text
protocol.
(iii) Description allows for further identification of who the text
address belongs to.
(iv) Click on Save to add
(v) Click on Add New to add another text or email address or
close the window when done
iv)
Step 3: Adding Email Alert to Loggers:
