Dickey-John Instalab 700 NIR, Operator'S Manual

Page: 33 / 111

OPERATOR’S MANUAL
Instalab 700 NIR Product Analyzer
11001-1574-201107
SAMPLE PREPARATION 29
4 INCH LARGE OPEN SAMPLE CUP
The large open sample cup is an option for use with whole, sample-type
grain. To use the large sample cup, the standard sample tray must be
removed and replaced with a larger sample tray.
To install the large sample cup and tray:
1. Open the drawer and remove the (3) Allen head screws from the
standard tray using a 5/64 Allen driver. Set aside the screws to
re-attach the large tray.
2. Remove the sample tray from the plate.
Figure 27
Remove Standard Sample Tray
3. Remove the (2) #2 Phillips screws from the sample motor mounting
plate.
4. Move the sample motor plate approximately 1” to the left and align the
motor plate screw hole with the outermost mounting plate hole.
Figure 28
Re-align Mounting Plate
5. Re-insert the (2) Phillips screws through the mounting plate and
secure to the drawer tightening to 6 in. lbs.
6. Place the large sample tray onto the sample motor plate aligning the
(3) Allen screw holes to the plate holes.
Remove screws
and move plate
to left. Align with
outermost hole.