Dickey-John Instalab 700 NIR, Operator'S Manual

Page: 28 / 111

OPERATOR’S MANUAL
Instalab 700 NIR Product Analyzer
11001-1574-201107
24 SAMPLE PREPARATION
Figure 17
Cleaned Sample
9. Place sample cup bottom cover over filled sample cup. Use slight
downward pressure on the cup bottom while turning it clockwise.
10. Release the pressure and then twist the cup bottom counterclockwise
while lifting the filled sample cup from the loading tray.
Figure 18
Place Sample Cup Bottom Onto Filled Cup
11. Clean remaining sample residue from sample cup lip.
Figure 19
Remove Sample Residue
NOTE: Do not touch and/or fingerprint
the glass cover.
12. Thoroughly clean the tray after loading the sample cup.
13. After the test is complete, disassemble the sample cup.
14. Press the two halves together and turn the cup top counterclockwise.
15. Clean all sample material from the sample cup before reusing.
Place bottom cover onto
filled sample cup and
turn clockwise to secure
Remove remaining
residue from
sample cup