Dickey-John DjASM II, Operator'S Manual, Page: 8 / 28

OPERATOR’S MANUAL
Dj ASM II Air Seeder Monitor
11001-1311-200501
INSTALLATION / 5
Figure 5
Main Harness Connection
Route the main harness to the rear of the tractor. Mount the relay (part of
the main harness) to a suitable location at the rear of the tractor, assuring
the connector will reach the implement connector at the hitch.
MODULE MOUNTING
Lay out all harnesses and modules on the implement to determine proper
mounting locations. Refer to Figure 2 for layout guidelines.
Use the module as a template for drilling in a location that will allow the
tower harness to reach all the sensors installed on the air seeder and be
connected to the hitch cable or next module in line (1/4-20 hardware is
recommended).