Dickey-John DjASM II, Operator'S Manual

Page: 15 / 28

OPERATOR’S MANUAL
Dj ASM II Air Seeder Monitor
11001-1311-200501
12 / SYSTEM OPERATION
Figure 12
Sensor Detection Sequence
Figure 13 illustrates a row that was not detected during the sensor test is
not usable. This could indicate that a sensor is not connected or has failed
on module 1.
Figure 13
Example of Failed Row
Figure 14 illustrates that no rows are lit on the Hopper detection sequence.
This indicates that a Hopper module was detected but no Hopper sensors
were detected.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 4
1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 4