Dibal DPOS400 SERIE Test And Adjustments Manual Download Page 52

Page: 52 / 72

Test y Ajustes

4.36 TF-1000 protocol

Protocol

Cash Register

Scale

WWWWWW3E

Where:

0x05h

0x06h

0x02h

WWWWWW:

6 characters for weight. LSB left character, MSB right character

Ex:

0x03h

0x33h set the position of decimal point

NOTE:

The scale always sends Eq when the key

is pressed.

The weight is send from right to left (LSB



MSB).

If the weight is out of range (with “--------“ on the display), it sends the weight as 0.

When the weight is unstable the scale sends the momentary weight.

The value of the decimal point is a fix value.

The scale sends the weight when it receives a Ak. The scales do not take into account if it sends an
Eq or not.

If the scale has a tare weight, it sends the net weight.

Summary of Contents for DPOS400 SERIE









































































Search results

Summary of Contents for DPOS400 SERIE

Reviews:

Related manuals for DPOS400 SERIE

Brands by name

Popular brands

Dibal DPOS400 SERIE, Test And Adjustments Manual

Search results

Summary of Contents for DPOS400 SERIE

Reviews:

Related manuals for DPOS400 SERIE

Brands by name

Popular brands