Dibal DPOS400 SERIE Test And Adjustments Manual Download Page 6

Page: 6 / 72

Test y Ajustes

1.2 DISPLAY TEST

This allows the user to assure that there are no problems with the display. Being main screen of test

mode, press the key

and then hold the key

. Be careful, if you hold the key

a lot of time, the

scale will shut down.

Press 3 times the key

to return to the main screen.

1.3 KEYBOARD TEST

To verify the correct operation of keys is enough to press the different buttons and see if it beeps.

Filter

This adjustment allows choosing the working mode of the scale, only weight or price, weight amount. The
adjustment can take two different values, as is shows follow:

Filter = 0

Only weight

Filter = 1

Price, weight and amount

Press the key

to enter to this menu. The value can be changed pressing the key

Press 3 times the key

to return to the main screen.

Summary of Contents for DPOS400 SERIE









































































Search results

Summary of Contents for DPOS400 SERIE

Reviews:

Related manuals for DPOS400 SERIE

Brands by name

Popular brands

Dibal DPOS400 SERIE, Test And Adjustments Manual

Search results

Summary of Contents for DPOS400 SERIE

Reviews:

Related manuals for DPOS400 SERIE

Brands by name

Popular brands