Dibal DPOS400 SERIE Test And Adjustments Manual Download Page 9

Page: 9 / 72

DPOS 400

49-TGDP4ES02

2.2 IML PROGRAMMING

This allows the user to set a series of parameters as recommended by the OIML. This parameter

cannot be modified.

Press the key

to program the next field.

2.3 CAPACITY PROGRAMMING

This allows the scale capacity to be selected according to the following table.

Press the key

to increase the programming value

Press the key

to decrease the programming value

Press the key

to program the next field.

2.4 ADJUSTMENT

This allows an adjustment to be done. The default value of 0 will always be shown. Change the

value pressing the key

and then press the

key

to program the next field.

Do not enter this option

if you are not qualified or if you do not have the calibrated weights.

This should only be done by authorized personnel.

The following sections will only be visible when this parameter will set to 1.

2.4.1

LATITUDE ADJUSTMENT

Code

Capacity

6 kg

15 kg

6/15 MR

Summary of Contents for DPOS400 SERIE









































































Search results

Summary of Contents for DPOS400 SERIE

Reviews:

Related manuals for DPOS400 SERIE

Brands by name

Popular brands

Dibal DPOS400 SERIE, Test And Adjustments Manual

Search results

Summary of Contents for DPOS400 SERIE

Reviews:

Related manuals for DPOS400 SERIE

Brands by name

Popular brands