Diamatic BG-180EC, Operating Manual

Page: 36 / 75

Operating Manual BG-180EC
Operation
2
6.1 Operation
The Operating Instructions are to be kept near the location
where the machine is located and must be within reach at all
times !
Only trained personnel may be employed. Note the statutory
minimum age! Specify clearly the responsibilities of personnel for
operation, setting up, servicing and maintenance work!
Make sure that only authorised personnel operate or work on the
machine!
A regular inspection is necessary to prevent downtimes of your
grindingmachine.
See chapter 7 "Maintenance".
Pay attention to following aspects during operation of the
BG-180EC
Before beginning the grinding work, check daily for regular tightness
of all fasteners, especially those of the driving and handling devices.
Before switching on, make sure that all protective housings are fitted
and the dust collector unit is correctly connected.
Handle all plugs, cables, hoses and operating elements careful. Avoid
the contact with live wire.
Before grinding, clean the surface to be treated with a broom. There
should not be any trash like stones, cloths, or standing liquid on the
surface.
Proud up stands, like concrete reinforcing steel or other objects,
should be removed from the work surface to prevent damage to the
machine seals, or to the diamond discs.
By using the dust collector unit observe the specially worker's
protection rules, and also the local regulations regarding waste
disposal.