Diamatic BG-180EC, Operating Manual

Page: 32 / 75

Operating Manual BG-180EC
Initial operation
2
5.1 Preparation for initial operation
Before start-up the operating personnel must be familiar with the
safety regulations given in this manual.
; Put the grinding machine and the filter unit on to the
surface to be processed.
; Fit the appropriate diamond grinding disc that is required
for this particular process. Please read
chapter 7
“Maintenance” of this manual.
;
By using the correct cables, connect the machine and the
dust collector to the electricity supply point, these electric
supply points should be protected and equipped with a Fl-
switch. (Residual current operated device). In case of
doubt ask the local safety officer.
;
Check the extension cable for external damages.
; Check the dust hose for damages
; Connect the grindingmachine and the dust collector unit
with the flexible dust hose. Use hose clamps at the
connections.
;
Make sure the dust bin of the dust collector unit is empty.
If problems with the current supply arise during the assembly or the
start up, call a qualified person for help. Work on electrical equipment
may only be undertaken by qualified personnel.
Any machine, if it is not used according the regulations , may be
hazardous to the operating, setting-up and service personnel. The
operating authority is responsible for compliance with the
safety regulations during operation and maintenance of safety
devices supplied with the machine as well as the provision of
appropriate additional safety devices!