Diamatic BG-180EC, Operating Manual

Page: 44 / 75

Operating Manual BG-180EC
Maintenance
4
7.3 Repairing
As previously mentioned in Chapter 5 “Initial operation” we
recommend to execute the first repair works on the machine by
having support of
Diamatic personnel, by taking this advice,
maintenance personnel gets the opportunity to be trained by an
expert on the machine.
Only repair work that could occur within the bounds of regular
operation of the machine, or work that is required to replace wear
parts, will be described.
If parts are replaced by yourself for a specific reason, the following
instructions and work sequence should be observed.
It would be advisable to stock all spare or wear parts that cannot be
obtained quickly. As a rule, production standstill periods are more
expensive than the cost for the corresponding spare part.
Screws that have been removed must be replaced with those of the
same quality (strength, material) and design.
Prior to any repair works on the machine and its drives, secure the
machine against unintentional switching-on. See chapter 2.6.
When no original components / wear parts are used, every
revendication on guarantee expires.