73
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.6.9
C7SLI – CCS SS7 Signaling Link Initiate
Synopsis
This command is used to initiate a SS7 Signaling Link (
C7LINK
).
The command allows the user to specify the signaling processor (
EQU
), Signaling Timeslot (
TS
) as well as
which SS7 linkset (
LS
) the link belongs to. The user may alternatively specify an M2PA SIGTRAN link
(
SNLINK
) instead of a processor and timeslot for communication of SS7 information.
See
Section 7.2, “Signaling Configuration” on page 136
for a more detailed description of the SS7 signaling
configuration.
Syntax
C7SLI:
C7LINK
=,
LS
=,
SLC
=,
EQU
=,
TS
=,[
M56K
=,][
PCR
=,];
C7SLI:
C7LINK
=,
LS
=,
SLC
=,
SNLINK
=;
C7SLI:
C7LINK
=,
LS
=,
SLC
=,
EQU
=,
M56K
=,[
PCR
=,];
Prerequisites
•
The specified link has not already been initiated.
•
The specified
PCM
time slot is not already assigned elsewhere in the system.
•
The
PCM
on which the timeslot exists has been initiated.
•
The board on which the
EQU
exists has been initiated.
•
The timeslot is a valid timeslot for the
PCM
type (up to 31 for an E1 PCM and 24 for a T1 PCM).
•
The signaling processor specified by the
EQU
parameter must be equipped with a valid board type and
not already assigned to a link.
•
The link set has already been initiated.
•
The board position specified by
EQU
must be blocked.
•
If
M56K
is set to 3 or 4, the
TS
cannot be specified and if M56K is not set to 3 or 4,
EQU
must be
specified.
•
Only
EQU
signaling processors 1 and 2 can be used if
M56K
is 3 or 4.
•
If an
SNLINK
is present, the
EQU
,
TS
,
M56K
and
PCR
cannot be present.
•
If an
SNLINK
is specified, its
SNTYPE
must be M2PA.
•
If an
SNLINK
is specified, it must be initiated, blocked and cannot be associated with any other SS7 link.
•
Either a
SNLINK
or
EQU
must be present.
•
SS7 links can use signaling processors 1 to 4 on a SPCI4 or SPCI2S board or 1 to 64 on a SS7HDP board.
Attributes
CONFIG
Examples
C7SLI:
C7LINK
=4,
EQU
=3-1,
TS
=3-3-17,
LS
=1,
SLC
=5;
C7SLI:
C7LINK
=5,
SNLINK
=1,
LS
=2,
SLC
=0;
