49
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.5.1
CNBOI – Configuration Board Initiate
Synopsis
This command defines a new board on the system.
The user should specify the board position (
BPOS
) within the unit, the physical type of the board (
BRDTYPE
)
and the signaling type (
SIGTYPE
), which identifies the software that will run on the board.
See
Section 7.1.2, “Boards and PCMs” on page 136
for a more detailed description of board configuration.
Syntax
CNBOI:
BPOS
=,
BRDTYPE
=,
SIGTYPE
=;
Prerequisites
•
No board has already been defined for the specified board position.
•
A board must physically exist for the board position and be licensed for the signaling gateway.
•
A board type of SS7HDP must have a signaling type of SS7.
Attributes
CONFIG
Examples
CNBOI:
BPOS
=1,
BRDTYPE
=SPCI4-4-4,
SIGTYPE
=SS7;
CNBOI:
BPOS
=1,
BRDTYPE
=SPCI2S-4-2,
SIGTYPE
=SS7;
CNBOI:
BPOS
=3,
BRDTYPE
=SS7HDP-64-4,
SIGTYPE
=SS7;
6.5.2
CNBOE – Configuration Board End
Synopsis
This command deassigns a board from a board position.
Syntax
CNBOE:
BPOS
=;
Prerequisites
•
A board has been defined for the specified board position.
•
No signaling processor on the board has been allocated to a signaling link.
•
No
PCM
on the board is configured.
•
The board has been blocked.
Attributes
CONFIG
Examples
CNBOE:
BPOS
=3;
