53
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.5.9
CNPCC – Configuration PCM Change
Synopsis
This command allows changes to the configuration of a
PCM
.
Syntax
CNPCC:
PCM
=,{[
PCMTYPE
=,]|[
SYNCPRI
=,][
FF
=,][
LC
=,][IDLE=][BM=][
BUILDOUT
=,]};
Prerequisites
•
The
PCM
has already been initiated.
•
For a
PCMTYPE
of E1, the
LC
can be set to HDB3 and the
FF
can be set to G704, CRC4, CRC4C or
CRC4G706.
•
For a
PCMTYPE
of T1, the
LC
can be set to AMI or B8ZS and the
FF
can be set to SF, ESF or CRC6.
•
An
FF
of CRC4G706 can only be set on a board type of SS7HDP.
•
The
BUILDOUT
parameter can only have a value of 0 for E1 and a value of 1 for T1s on boards of a type
other than SS7HDP.
Attributes
CONFIG
Examples
CNPCC:
PCM
=1-1,
SYNCPRI
=3;
6.5.10
CNPCE – Configuration PCM End
Synopsis
This command ends the configuration of a
PCM
such that it is unavailable for voice or signaling.
Syntax
CNPCE:
PCM
=;
Prerequisites
•
No timeslot on the
PCM
has been assigned to voice, signaling monitoring or cross connections.
•
The board on which the
PCM
exists has been blocked.
Attributes
CONFIG
Examples
CNPCE:
PCM
=1-1;
