71
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.6.6
C7RTC – CCS SS7 Route Change
Synopsis
This command is used to change the attributes of an SS7 Route. The
DPC
parameter in this command
supports an extra value ‘DFLT’. When a route is specified as default, messages destined for DPCs within the
network context that have not been configured by the system is sent to the default route.
Syntax
C7RTC:
C7RT
=,
NC
=,[
DPC
=,][
LS1
=,][
LS2
=,][
LSH
=,][
LABEL
=,];
Prerequisites
•
If specified,
LS2
must have same
SS7MD
,
NI
,
NC
, and
OPC
as
LS1
.
•
If specified,
LS1
must have same
SS7MD
,
NI
,
NC
, and
OPC
as
LS2
.
•
The specified route has already been initiated.
•
Any link set specified has already been initiated.
•
The
DPC
/
NC
combination (associated with the route’s link sets) must be different for each route.
•
If changing any parameter other than the
LABEL
, all SS7 signaling links must be blocked.
Note: After blocking, an SS7 link cannot be unblocked until all the boards processing the SS7 signaling
are blocked and then unblocked.
•
Only one default route can be configured per network context.
•
If a default route is specified, a network context cannot be configured with a
DPC
of 0.
Attributes
CONFIG
Examples
C7RTC:
C7RT
=1,
NC
=1,
LS1
=2;
