D i a l o g i c P C I L i n e c a r d s
2 5
1081-50821-00 Rev 01
October 2011
Appendix A—Manually Adding a Linecard to
the Configured Devices List
If the DCM fails to detect a linecard in the platform automatically, you can add the linecard
manually using the DCM.
To manually add a linecard
…
1. Select
Start
|
Programs
|
Dialogic System Release
, and then select
Configuration
Manager
– DCM
.
2. If the Computer Name dialog box appears, select
Local
, and then click
Connect
to
continue.
3. If the Dialogic service is running, click the red
Stop
icon on the toolbar.
4. From the menu bar, select
System
, and then select
Auto detect devices
.
5. Do one of the following:
If the linecard...
Then ...
Is detected
It displays in the Configured Devices list. Go to the section,
―Configuring Dialogic PCI Linecards in Dialogic Configuration
Manager - DCM
‖ for instructions.
Is not detected
Proceed to step 6.
6. From the menu bar, select
Device
, and then click
Add Device
. The Add Hardware
Wizard dialog box displays.
7. Select the board you installed from the Family column, the type from the Model column,
and then click
Next
. The Device Name dialog box displays.
8. Give the Device a unique name.
9.
Follow the DCM Add Hardware Wizard’s on-screen instructions to add the board. If
necessary, refer to the section, Configuring Dialogic PCI Linecards in Dialogic
Configuration Manager - DCM for instructions.
