D i a l o g i c P C I L i n e c a r d s
2 3
1081-50821-00 Rev 01
October 2011
Configuring Dialogic PCI Linecards in Dialogic
Configuration Manager - DCM
The Dialogic Configuration Manager (DCM) is a utility that allows you to configure the
parameters used by the Dialogic system software to control the Dialogic linecards installed in
the platform. Each time you start the DCM, it automatically detects any installed linecards. The
DCM matches the linecards it detects with the corresponding configuration data.
The DCM has a comprehensive online help system. Consult the
Dialogic Installation and
Configuration Knowledge Base
book in the help system for advice about troubleshooting the
Dialogic system software.
To configure a Dialogic linecard
…
1. Select
Start
|
All
Programs
|
Dialogic System Release
, and then click
Configuration
Manager
– DCM
.
2. If the Computer Name dialog box appears, select
Local
, and then click
Connect
to
continue. The Dialogic Configuration Manager dialog box displays.
3. Double-click the
Bus-0 icon
.
4. From the Parameter list, click
TDM Bus Type
(User Defined)
if it exists.
If the TDM Bus Type (User
Defined) parameter
…
Then
…
Exists
Continue with step 5
Does not exist
Verify that the TDM Bus Type (Resolved)
parameter is set to H.100. If it is not, contact
Aastra Technical Support for assistance.
5. From the Value list, select
H.100
, and then click
OK
.
6. Do one of the following:
If the Dialogic voice resource
cards installed
in the platform…
Then…
Appear automatically in the
Configured List
Double-click the first card Devices list in the
Configured Devices
Do not appear automatically in the
Configured List
From the System menu, select
Auto-detect
devices
from the Configured Devices List. If the
card(s) do not appear, contact Aastra Technical
Support for assistance.
7. In the Properties dialog box for the selected linecard, click the
Telephony Bus
tab, and
then select
PCM Encoding
in the Parameter list.
