![background image](http://html1.mh-extra.com/html/dialogic/pbx-integration-board-d-82jct-u/pbx-integration-board-d-82jct-u_installation-and-replacement_2493077030.webp)
2 4
D i a l o g i c P C I L i n e c a r d s
1081-50821-00 Rev 01
October 2011
8. Select the PCM encoding scheme used by your telephone switch:
If the PCM encoding scheme
used by the telephone switch is
…
Then …
U-law
Select
ULAW
in the Value list box
A-law
Select
ALAW
in the Value list box.
9. Click the
Country
tab, and then click
Country
in the Parameter list.
10. Select your country in the Value list box, and then click
OK
to apply the changes you
have made.
11. Repeat steps 3-10 for each Dialogic voice-resource card installed in the platform.
12. Click the green
Start
icon on the toolbar to start the Dialogic Service. The Dialogic
Service starts.
13. Once the service has started the Red Stop icon displays on the toolbar and the System
Status on the bottom of the dialog box displays,
Running
.
14. From the menu bar, select
Settings
|
System/Device autostart
, and then click
Start
System
.
15. From the menu bar, select
File
, and then click
Exit
.
16. Select
Start
|
Control Panel
, and then double-click
OneBox Config
. The OneBox
System Configuration utility starts.
17. Select the
Automatic Startup
check box on the utility’s Main tab.
18. Click the
Boards
tab, and then click
Auto Detect
.
19. Verify that all of the linecards installed in the platform appear in the Boards list and are
associated with the correct range of port numbers.
20. To exit the System Configuration utility, click
OK
.
21. Restart the Call Server.
22. After the restart has completed, start the System Configuration and Line Status utilities.
Verify that the OneBox Service has started and is running normally.