1-8
ID-01 Laser Scanner User’s Manual
Test Read Rate
Step 7 —Test Read Rate
With this test you can learn the percentage of decodes per images captured by observing
the LEDs (20% through 100%) on the top of the ID-01 which are active during a read rate
test. If the results are not satisfactory, move on to
Step 8 — “Calibrate the Scanner”
.
By di-soric ID
After connecting to the scanner,
di-soric ID
will open in
Setup Mode
.
1. Click the
EZ Button
in
Setup Mode
to begin the read rate test.
2. Follow the instructions in
Setup Mode
.
3. To end the read rate test, click the
Stop
button.
By the EZ Button
1. Press and hold the
EZ
button on the ID-01 until
you hear one beep and see one LED momentarily
turn amber. This will signal the beginning of the
read rate routine.
1
2. To end the read rate test press the
EZ
button and
quickly release.
1. This assumes that the default functions of the EZ button have not been re-programmed.
Summary of Contents for ID-01
