ID-01 Laser Scanner User’s Manual
2-9
Quick Start
Connect Menu
Autoconnect
Generally Autoconnect will be the quickest way that di-
soric ID can get connected to a scanner. Autoconnect will
try connecting at the most common communications set-
tings and step through the various settings until they match
up with the host’s settings.
Connect
When you select Connect, you will need to manually select
the communications settings from a popup dialog.
Configure Multidrop
To connect to the scanner by Multidrop, you will need a multidrop concentrator and the
required power supplies and cabling to communicate with your scanner(s).
1. From the Communications drop
down menu in di-soric ID, select
Configure Multidrop
to bring up the
Multidrop Settings dialog.
2. If necessary, change the default
address to match the address of
your multidropped scanner and
click
OK
.
If the host serial port is not con-
nected in di-soric ID, you will see
the following popup message:
“di-soric ID is not currently con-
nected to the multidrop concentra-
tor. Do you wish to establish a
connection now?”
3. Click
Yes
.
You will see a Connection Settings
dialog.
Summary of Contents for ID-01
