Di-soric ID-01, User Manual

Page: 94 / 222

5-12
ID-01 Laser Scanner User’s Manual
Interleaved 2 of 5
Symbol Length #2 (Interleaved 2 of 5)
Range Mode Status (Interleaved 2 of 5)
Usage: If using a second symbol, a zero or any even symbol length in the option
range may be specified. If not using a second symbol, set Symbol Length
#2 to 0 to ensure data integrity.
Definition: Specifies a number of characters that the scanner will recognize, including
start and stop and check digit characters. The scanner ignores any symbol
smaller than the specified length.
Note : If Range Mode is set to Enable , the settings for Symbol Length #1
and Symbol Length #2 will define the range of symbol lengths that can be
decoded.
Serial Cmd: < K472, status,check digit status,check digit output status,symbol length
#1, symbol length #2 ,unused,range mode>
Default: 6
Options: 0 to 64
Since I 2/5 characters are paired, symbol length must be set to an even
number. If Check Digit is enabled, add 2 to your symbol length. For exam-
ple, if your symbol is 10 characters plus a check digit, then enable Symbol
Length for 12.
Note : Typically, when printing an I 2/5 symbol with an odd number of digits,
a 0 will be added as the first character.
Usage: Useful in applications where symbol lengths may vary.
Definition: Allows user the option to define a symbol length range for I–2 of 5.
Serial Cmd: < K472, status,check digit status,check digit output status,symbol length
#1,symbol length #2,unused, range mode >
Default: 0
Options: 0 = Disabled 1 = Enabled
When set to Enabled , minimum and maximum symbol lengths will be
defined by Symbol Length #1 and Symbol Length #2 .