S Series Shelter
Operation & Maintenance
95310-02
2-15
DHS Systems, LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may
be reproduced for release to a third party without written consent from DHS Systems LLC
.
7.
Straighten out any ripples found along the length of the Window.
Window Sets can be cleaned with a mixture of hot soapy water, or any household window cleaner
023.01 “T” to “T” Connection
The length of S Shelters can be extended by joining one or more Shelters together at the ends. To attach “T” shelters to
form a longer Shelter:
1.
Butt each of the “T” ends together when all of the Shelters are at Push Pole height.
2.
Begin securing the Velcro on the exterior cover starting at the center of the “T” end.
3.
Open the shorter connector strip.
4.
Locate the longer connector strip on the other Shelter and secure the Velcro.
5.
Check that each connection has been properly made.
6.
Move back to the center of the Shelter. Use the same method to secure the Velcro on the interior cover.
7.
To finish setting up, continue to follow manual procedures.
