44
DHOLLANDIA
Figure 14.2
15
MOUNTING OF THE SIDE STEPS & DOCK BUMPERS
1.
There are 2 possible set-ups [see also drawings in appendix]:
I.
Side steps directly bolted to floor extension plate by means of 2 bolts M16 [1 in Figure 15.1], to obtain 2430mm overall
width (for 2160mm platform width).
II.
Side steps with intermediate mounting blocks [2 in Figure 15.1], bolted together in 2 subsequent steps by means of 2+2
bolts M16 [1+3 in Figure 15.1] to obtain 2590mm overall width.
2.
Bolt the side steps to the floor extension as shown. If a 2590mm extension kit is specified, install the extension kit [2+3 in Figure
15.1] before mounting the side steps.
3.
Maintain a 90° angle between the steps and the extension plate. [Figure 15.3]
4.
Fasten all bolts and locking nuts to the required torque settings.
Summary of Contents for DH-RP.10
