Dhollandia DH-RP.10, Installation Manual, Page: 20 / 76

19
DHOLLANDIA
Figure 8.1
Dimensions table
mm
A 860
B 735
C 610
D 355
E 180
F 38
G 14
H 80
Figure 8.2

Align the centreline of the extension plate to the centreline of the rear sill. Make sure it is level with vehicle floor [Figure 8.2]. If not
level, vary the mating surfaces between the extension plate and rear sill, remove any obstructions, or adjust as needed.

Bolt the extension plate to the rear sill, using 11 bolts M14 and locking nuts supplied with the tail lift [Figure 8.3]:
WARNING

The extension plate is very heavy! When falling on a person, it can cause serious personal injury or death.

Therefore, handle the plate with care. Use lifting aids such as a forklift, gantry crane, hoists etc… to secure the plate, and
prevent it from falling.