Dhollandia DH-RP.10, Installation Manual

Page: 17 / 76

16
DHOLLANDIA
Figure 6.6
Dimensions table
mm
A 190
CHW MIN 750
CHW MAX 1060
BWO MIN 1980

The tail lift is equipped with bolt-on mounting plates, adjustable in width for chassis width 750mm < W < 1060mm. The mounting
plates don’t require any welding. [Figure 6.6]

Refer to Figure 6.4 for the min. body width BWO MIN. required for installation with premounted pump unit.
NOTICE

If you decide to remove the mounting bar and change the mounting height MFT of the tail lift, ensure to stay within the
applicable ranges for the installation parameters VFH, MFT and MTG.

Consult the national DHOLLANDIA distributor for confirmation of max. and min. mounting dimensions and obtain a chassis
cut-out drawing for the new mounting height MFT.

Mounting height MFT is measured from the top of the vehicle bed to top of the main frame tube. Use Figure 6.5 when
determining mounting height MFT, make sure the height of the RUPD complies with regulations.