DHD Power Cruiser 52/XR Manual Download Page 55 | Manualshive

Page: 55 / 60

background image

© 2010 DHD Deubner Hoffmann Digital GmbH

52

Series 52 - 52/XR MADI Router Manual

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

8.3.13 52-5860A - XD/XR RS232/RS422 Extender

Meaning of the LEDs of the 52-5860 Module.

1. This LED is permanently on if the module is powered.

2. Indicates, that an RS422 signal is connected to the lower port. This signal indication does not show, whether it is a valid

RS422 signal or not.

«
...
53
54
55
56
57
...
»

Summary of Contents for 52/XR





























































Reviews:

No comments

Related manuals for 52/XR

Brand: D-Link Pages: 2

Brand: BandLuxe Pages: 67

TOWERCHRON DP72

Brand: Grasslin Pages: 2

Brand: Allied Telesis Pages: 22

Brand: Z Microsystems Pages: 51

Brand: IMC Networks Pages: 36

Brand: TP-Link Pages: 113

Brand: VIA Technologies Pages: 25

Brand: Intellinet Pages: 12

WISENET XRN-1610

Brand: Hanwha Techwin Pages: 88

Brand: Omron Pages: 4

Brand: SMC Networks Pages: 68

Brand: TP-Link Pages: 17

IPSec VPN Client Zyxel ZyWall 10

Brand: TheGreenBow Pages: 12

Threat Analysis Reporter TAR HL/SL/MSA

Brand: 8e6 Technologies Pages: 22

Brand: C-Data Pages: 19

AirLancer MC-54

Brand: Lancom Pages: 47

Brand: B&B Electronics Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands