© 2010 DHD Deubner Hoffmann Digital GmbH
30
Series 52 - 52/XR MADI Router Manual
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
The synchronisation tab can be seen by selecting the Audio branch.
If a BNC is chosen as sync source, you can define whether the system should react on the rising or the falling edge and
you can activate the input termination if the sync signal ends at this input (no t-piece at the input). As long as BNC 2 is not
selected as a sync source, it is possible to configure it as output. In the output mode you can choose between rising and
falling edge to produce a phase shift.
7.1.7
Transferring a Configuration to a Device
If you want to transfer a configuration to a device, please follow these steps:
·
Select the desired device in the projects device tree.
·
Click on the
symbol in the toolbar or choose
Load to Device
in the
Transfer
menu. The
DHD Connection
Dialog
appears.
·
Select the desired hardware from the list and press
OK.
The transfer process starts and the configuration is copied to the chosen hardware.