DHD Power Cruiser 52/XR Manual Download Page 53 | Manualshive

Page: 53 / 60

background image

© 2010 DHD Deubner Hoffmann Digital GmbH

50

Series 52 - 52/XR MADI Router Manual

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

8.3.11 52-6710A - XR Router/DSP Sync. Module

Meaning of the LEDs of the 52-6710 Module.

1. This LED is permanently on if the module is powered.

2. Indicates, that the module is running. This LED blinks. Seen from left to right over the entire system, these LEDs should

blink as a moving light.

3. Indicates, that the primary sync is active. Dependent on the configuration, the primary sync source can be the upper

BNC (Word Clock, AES3/EBU or Video), the lower BNC (Word Clock or AES3/EBU), the RJ45 connector of the sync
module (AES3/EBU), a MADI signal (MADI port 3.1 or 13.1) or the internal sync. This LED can not be on if LED 4 glows
and it blinks during the video signal locking process.

4. Indicates, that the secondary sync is active. Dependent on the configuration, the secondary sync source can be the

upper BNC (Word Clock, AES3/EBU or Video), the lower BNC (Word Clock or AES3/EBU), the RJ45 connector of the sync
module (AES3/EBU), a MADI signal (MADI port 3.1 or 13.1) or the internal sync. This LED can not be on if LED 3 glows
and it blinks during the video signal locking process.

5. The LED is permanently on if the primary sync is functional. Blinking indicates, that PLL 1 is out of range.

6. The LED is permanently on if the secondary sync is functional. Blinking indicates, that PLL 2 is out of range.

7. Indicates, that the primary AES3/EBU sync signal (connected to the upper BNC, the lower BNC or the RJ45 jack of the

sync module) is locked.

8. Indicates, that the secondary AES3/EBU sync signal (connected to the upper BNC, the lower BNC or the RJ45 jack of the

«
...
51
52
53
54
55
...
»

Summary of Contents for 52/XR





























































Reviews:

No comments

Related manuals for 52/XR

Brand: iBall Baton Pages: 9

RUGGEDMAX WIN7000

Brand: RuggedCom Pages: 42

Brand: SurfControl Pages: 2

Brand: Accton Technology Pages: 78

EtherLink 3C905C-TX

Brand: 3Com Pages: 96

Brand: Intercoax Pages: 2

DVI-Vision-IP-Fiber

Brand: G&D Pages: 240

Brand: Tripp Lite Pages: 3

Brand: H3C Pages: 103

Brand: Dinstar Pages: 103

Brand: WatchNet Pages: 2

Brand: QNAP Pages: 68

Brand: IBM Pages: 24

Brand: H3C Pages: 4

Brand: H3C Pages: 46

Brand: TP-Link Pages: 2

Brand: Kraun Pages: 32

Brand: IBM Pages: 342

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands