11
877.524.0430
PDN
PACK
Field Manual
Problem/
Symptom
Possible
Cause
Verification
Possible
Corrections
Gateway is not getting power
Battery
is not
charged
Ensure Power Button is
“ON”. Check Battery Meter
on front of PDN Spine
ensuring LEDs are
displayed. If LEDs are not
lit, charge on battery may
have fallen too low.
Use AC Power Cord
to charge battery and
power gateway.
Gateway
power
is not
connected
Check LED on gateway.
The power LED should
be on when power is
above 9 volts. If LEDs
are off, gateway is not
getting power.
Remove PDN spine from
backpack to ensure
gateway power cable is
connected firmly into
back of gateway and
into the wire harness
connector.
Fuse is
blown
Remove PDN Spine from
backpack and open. Open
black rubber cover on fuse
holder connected to battery
charger. Remove fuse and
verify center strip is intact.
Replace the fuse with
a mini blade fuse of
same amperage
rating printed
on top of fuse.
PO
WER S
Y
STEM
