9
877.524.0430
PDN
PACK
Field Manual
8 . Locate AC Charging Cord, lift the weather cover on the recessed AC
receptacle, and plug in the unit . At this time, press the Battery Meter and
observe the current charge level . If 30 days have passed since the last
charge, it will likely show low charge . Allow the battery to charge until
Battery Meter indicates full-charge status .
9 . Return to storage while keeping unit plugged into available live
AC power source .
Record your maintenance data in the Maintenance Log on pages 16-19.
Note: All pass-through ports, caps, seals and gaskets should be inspected periodically to
ensure a tight fit.
Contact DHWS for information regarding PDN remote updates or other
maintenance needs . If you are experiencing ongoing issues with your PDN or would like to
order parts, contact DHWS at 877 .524 .0430, option 3 . For online support ticketing or incident
reporting, visit www .portablessupport .com .
TROUBLESHOOTING
1 . If unit fails to power up, check the Battery Meter to ensure battery is
sufficiently charged . Unit can run at the same time it is being charged by
AC power source .
2 . If battery needs to be charged, connect supplied AC Power Cord to unit’s
AC Charging Port, and then plug into a live 110-120V AC power source .
3 . If WiFi does not appear on your device, ensure Cellular Gateway is active
by checking status lights .
4 . Should a power-related issue persist, visit www .portablessupport .com .
