22
4. Press
the
↑
or
↓
keys to select “Prnt Enabled” on the bottom line of the display.
5. Press the
ENTER
key to enable the printer interface. The display will now
indicate:
Note:
To disable the printer interface, follow steps 1 thru 3 above, select
“Disabled” in step 4, and then press
ENTER
.
6. Use
the
↑
or
↓
keys, if necessary, to select a baud rate for the
Pachette 2
that
matches the baud rate of the printer (9600 is the default setting for the SII DPU-
414 printer). Press
ENTER
to confirm selection, then display will indicate:
EXT. INTERFACE
Disabled
BAUD RATE
9600 bps
PRINT NOTES
Enabled
7. Use
the
↑
or
↓
keys to enable or disable the Notes box on the printout.
8. Press
the
ENTER
or
CLEAR
key to save and exit the configuration menu.
Connecting The Printer To The Pachette 2 And Loading Paper
1. Turn off the power switch on the
Pachette 2
and the SII DPU-414 printer.
2. Plug
the
Pachette 2
AC power cord into the back panel of the
Pachette 2
and into
a three-prong AC outlet.
3. Connect the printer AC adapter to the back of the SII DPU-414 printer and to an
AC outlet as described in section 2.1 of the SII DPU-414 Operation Manual.
4. Plug the RS232C, 25-pin, “D-Type” connector on the end of the printer cable into
the mating connector on the rear of the
Pachette 2
.
Note:
If the printer is to be mated to the
Pachette 2
for extended periods of time,
it is recommended that the “D-Type” connector be secured to the
Pachette 2
using