30
STARTING UP
Switch on
(the switch is
not present
in models
T/T)
and wait the
STARTING
time (ab. 10
sec.)
By pressing
the button
START
STOP
you put
I
N SERVCE
OUT OF SERVICE
the inverter.
ACCESS TO MAIN MENU
MAIN MENU
BASIC MENU
parameters
BASIC PARAMETERS for the configuration of the drive.
ADVANCED MENU
parameters
ADVANCED PARAMETERS for the detailed configuration of
the drive.
INSPECTION MENU
parameters
INSPECTION PARAMETERS, display the hours of work, the
number of starts, alarm history, etc..
TEST
mode
(only in
OFF
mode)
TEST mode allows you to start and stop the pump in manual mode (START
/ STOP button) and change the frequency in steps of 1 Hz.
It also allows to control the operating parameters of the motor and inverter.
WARNING: DURING MANUAL OPERATION, AUTOMATIC CONTROLS
ARE EXCLUDED, AND THE OPERATOR MUST AVOID ANY
INCORRECT OPERATION.
ACCESS TO PARAMETERS
BASIC
ADV
INSP
TEST
To ACCESS the
four main MENU
Press the SET
button for 3 sec.
To
SCROLL
the
4
MAIN MENU
use the buttons
To
ACCESS and
EXIT
the
MAIN
MENU
use the buttons
To
MODIFY
the
parameters
use the buttons
To
SCROLL
the
parameters
use the buttons
To
ENTER and EXIT
the
parameters
use the buttons
