DFI SD631-C236 User Manual Download Page 59

Page: 59 / 75

Step 4: Install the Intel Rapid Storage Technology Utility

The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows

RAID volume management (create, delete, migrate) from within the operating system. It will

also display useful SATA device and RAID volume information. The user interface, tray icon

service and monitor service allow you to monitor the current status of the RAID volume and/

or SATA drives. It enables enhanced performance and power management for the storage sub-

system.

1. Insert the provided DVD into an optical drive.

2. Click “Intel Rapid Storage Technology Utility” on the main menu.

4. Read the license agree-

ment and click “I accept

the terms in the License

Agreement.“ Then, click

Next.

3. Setup is ready to install

the utility. Click Next.

5. Go through the readme

document to view system

requirements and installa-

tion information then click

Next.

7. Confirm the installation and

click Next.

6. Click Next to install to

the default folder or click

change to choose another

destination folder.

Summary of Contents for SD631-C236












































































Search results

Summary of Contents for SD631-C236

Reviews:

Related manuals for SD631-C236

Brands by name

Popular brands

DFI SD631-C236, User Manual

Search results

Summary of Contents for SD631-C236

Reviews:

Related manuals for SD631-C236

Brands by name

Popular brands