DFI SD631-C236 User Manual Download Page 58

Page: 58 / 75

Step 3: Create a RAID Volume

1. When the Intel

RST option ROM status screen displays during POST, press <Ctrl> and

<I> simultaneously to enter the option ROM user interface.

2. Select 1: Create RAID Volume and press <Enter>.

3. Use the up or down arrow keys to select the RAID level and press <Enter>.

4. Use the up or down arrow keys to select the strip size and press <Enter>.

5. Press <Enter> to select the physical disks.

6. Use the up or down arrow keys to scroll through the list of hard drives and press <Space>

to select the drive.

7. Press <Enter>.

8. Select the volume size and press <Enter>. You must select less than one hundred percent

of the available volume space to leave space for the second volume.

9. Press <Enter> to create the volume.

10. At the prompt, press <Y> to confirm volume creation.

11. Select 4: Exit and press <Enter>.

12. Press <Y> to confirm exit.

Note:

These steps are cited from the Intel

Support site, “Set Up a System with Intel

Matrix RAID Technology” (Article ID: 000005789).

http://www.intel.com/content/www/us/en/support/boards-and-kits/000005789.html

ACPI Configuration Setting

►

ACPI Configuration

►

CPU Configuration

►

Video Configuration

►

Audio Configuration

►

SATA Configuration

►

USB Configuration

►

PCI Express Configuration

►

ME Configuration

►

MEBX Configuration

►

Active Management Technology Support

►

SIO NUVOTON6106D

►

Intel

Rapid Storage Technology

Main

Advanced

Help

↑/↓

Select Item

F5/F6

Change Values

Setup Defaults

Esc

Exit

←/→

Select Item

Enter

Selec

►

ubMenu

F10

Save and Exit

InsydeH20 Setup Utility

Security

Boot

Exit

Rev. 5.0

ACPI Configuration Setting

►

ACPI Configuration

►

CPU Configuration

►

Video Configuration

►

Audio Configuration

►

SATA Configuration

►

USB Configuration

►

PCI Express Configuration

►

ME Configuration

►

MEBX Configuration

►

Active Management Technology Support

►

SIO ITE IT8786E

►

Intel

Rapid Storage Technology

Main

Advanced

Help

↑/↓

Select Item

F5/F6

Change Values

Setup Defaults

Esc

Exit

←/→

Select Item

Enter

Select

►

SubMenu

F10

Save and Exit

InsydeH20 Setup Utility

Security

Boot

Exit

Rev. 5.0

3. The screen displays all available drives. Select “Create RAID volume” to create a RAID

volume”.

4. Use the up or down arrow keys to select the RAID level and press <Enter>.

5. Use the up or down arrow keys to scroll through the list of hard drives and press <Space>

to select the drive.

6. Press <Enter>.

7. Use the up or down arrow keys to select the strip size and press <Enter>.

8. Enter the volume size and press <Enter>.

9. At the prompt, press <Y> to confirm volume creation.

Step 3-1: Create a RAID Volume if the boot type is UEFI

If the boot type is set to UEFI, RAID volume creation will be different. Please use the following

steps to create RAID volumes. To set the boot type, enter the Insyde BIOS and go to “Boot”

>”Boot type”.

1. Go to the “Advanced” menu of the Insyde BIOS.

2. The “Intel

Rapid Storage Technology” menu appears. Enter this menu.

Summary of Contents for SD631-C236












































































Search results

Summary of Contents for SD631-C236

Reviews:

Related manuals for SD631-C236

Brands by name

Popular brands

DFI SD631-C236, User Manual

Search results

Summary of Contents for SD631-C236

Reviews:

Related manuals for SD631-C236

Brands by name

Popular brands