DFI SD631-C236 User Manual Download Page 21

Page: 21 / 75

Important:

If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the

+5V_standby power source of your power supply must support ≥1.5A. For 3 or more

USB ports, the +5V_standby power source of your power supply must support ≥2A.

Wake-On-USB Keyboard/Mouse

The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse

to wake up a system from the S3 (STR - Suspend To RAM) state. To use this function:

Audio

Rear Audio

The system board is equipped with 2 audio jacks. A jack is a one-hole connecting interface for

inserting a plug.

• Line-out Jack (Lime)

This jack is used to connect a headphone or external speakers.

• Mic-in Jack (Pink)

This jack is used to connect an external microphone.

Driver Installation

Install the audio driver. Refer to the chapter 4 for more information.

Rear Audio

Line-out

Mic-in

I C

Battery

Summary of Contents for SD631-C236












































































Search results

Summary of Contents for SD631-C236

Reviews:

Related manuals for SD631-C236

Brands by name

Popular brands

DFI SD631-C236, User Manual

Search results

Summary of Contents for SD631-C236

Reviews:

Related manuals for SD631-C236

Brands by name

Popular brands