18
Rear Panel I/O Ports
VGA
DVI-I
(DVI-D Signal)
Line-out
Mic-in
LAN 2
COM 1
HDMI
PS/2 KB/MS
USB 3.0
USB 2.0
PS/2 Keyboard/Mouse Port
PS/2 Keyboard/Mouse
Important:
The +5V_standby power source of your power supply must support ≥720mA.
2
10
9
I C
Battery
2
10
9
This rear I/O port is used to connect a PS/2 keyboard/mouse. The PS/2 mouse port uses
IRQ12.
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2
mouse to power-on the system. To use this function:
• BIOS Setting
Configure the wake-up function of PS/2 keyboard/mouse in the Advanced menu (“ACPI Con-
figuration” submenu) of the BIOS. Refer to the chapter 3 for more information.
The rear panel I/O ports consist of the following:
• 2 RJ45 LAN ports
• 4 USB 3.0 ports
• 2 USB 2.0 ports
• 1 Serial COM ports
• 1 PS/2 Keyboard/Mouse port
• 1 HDMI port
• 1 DVI-I(DVI-D Signal) port
• 1 VGA port
• Line-in jack (available upon request)
• Line-out jack
• Mic-in jack
LAN 1
