45
2
Hardware Installation
14-pin connector
Plug Plug
2. Align the module’s plugs above the mounting holes then insert
the plugs from the top through to the bottom of the system
board. While at it, the 14-pin connector at the solder side of the
module must also insert into the Karajan audio connector at
location J7 of the system board. Make sure the plugs snap firmly
out the bottom of the board.
1. Fit the module holder onto the Karajan audio module.
Mounting holes
Karajan audio
connector (J7)
Summary of Contents for LanParty UT CFX3200-DR
