
49
2
Hardware Installation
Universal Serial Bus Ports
The system board supports 8 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Six onboard USB 2.0/1.1 ports (Black) are at locations CN3 (USB
1-2), CN4 (USB 3-4) and CN6 (USB 5-6) of the system board.
J18 (USB 7-8) allows you to connect 2 additional USB 2.0/1.1 ports.
The USB ports may come mounted on a card-edge bracket. Install
the card-edge bracket to an available slot at the rear of the system
chassis then insert the connector that is attached to the USB port
cables to J18.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu of
the BIOS. Refer to chapter 3 for more information.
W
W
USB 2
USB 1
USB 7-8
W
W
USB 4
USB 3
USB 6
USB 5
1
VCC
-Data
+Data
GND
Key
VCC
-Data
+Data
GND
N.
C
.
2
1 0
9
Summary of Contents for LanParty UT CFX3200-DR
