DFI LanParty UT CFX3200-DR, User Manual

Page: 150 / 173

150
5
Cool‘n’Quiet Technology
Cool‘n’Quiet Technology
The AMD Cool‘n’Quiet
TM
technology allows the system to detect the
CPU’s tasks and utilization status. When the CPU’s task slows down,
the system effectively lowers power consumption by lowering its
CPU speed and voltage, subsequently decreasing its noise level.
To enable the Cool‘n’Quiet
TM
technology, the following settings are
required.
1. Enable Cool‘n’Quiet
TM
in the BIOS.
2. Install the Cool‘n’Quiet
TM
driver.
3. Configure Power Management in Windows.
Step 1: Enable Cool‘n’Quiet
TM
in the BIOS
1. Power-on the system then press <Del> to enter the main menu
of the BIOS.
2. Select the Genie BIOS Setting submenu then press <Enter>.
3. Set the “K8 Cool‘n’Quiet Support” field to Auto.
Chapter 5 - Cool’n’Quiet Technology
X
DRAM Configuration
X
LDT & PCI Bus Control
X
PCI Device Control
FSB Bus Frequency
LDT/FSB Frequency Ratio
CPU/FSB Frequency Ratio
CPU VID StartUp Value
K8 Cool‘n’Quiet Support
x Cool‘n’Quiet MAX FID
CPU VID Control
CPU VID Special Control
DRAM Voltage Control
SB PCIE Voltage
NB Analog Voltage
LDT Bus Voltage
NB Core Voltage
CPU Core Voltage
LDT Bus Voltage
SB PCIE Voltage
DRAM 2.6V Voltage
Phoenix - AwardBIOS CMOS Setup Utility
Genie BIOS Setting
Item Help
Menu Level
X
DRAM timing and
control
↑↓→←
: Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Press Enter
Press Enter
Press Enter
200MHz
Auto
Auto
StartUp
Auto
Auto
Auto
Auto
2.65V
1.80V
1.2V
1.2V
1.2V
1.31V
1.18V
1.92V
2.54V
X
X