DFI CW65 Series, User Manual

Page: 27 / 73

2
Hardware Installation
27
4. Después de encender el sistema, presiona <Del> para entrar a la utilidad de
configuración de BIOS.
5. Selecciona el submenú de CPU Frequency Control y presiona <Enter>.
6. Selecciona la proporción de frecuencia/reloj apropiada del procesador en el
campo de “CPU Clock/Spread Spectrum” o “CPU Ratio”.
7. Presiona <Es> para regresar al menú principal de la utilidad de
configuración de BIOS. Selecciona “Save & Exit Setup” y presiona “ Enter”.
8. Teclea <Y> y presiona <Enter>.
2.3 Jumper Settings for Wake-On-Keyboard/Mouse
Positionnement des Cavaliers pour Réveil-Sur-Clavier/Souris
Jumpereinstellungen für die Wake-On Tastatur/Maus
Configuraciones de Saltador para Teclado/
Ratón de Despertar
Jumper JP1 - Wake-on-Keyboard/Wake-On-Mouse
To use the keyboard or PS/2 mouse to power-on
the system, please follow the steps below.
1. Set JP1 to 2-3 On - enable.
2 “Keyboard/Mouse Power On” in the Integrated
Peripherals submenu of the BIOS must be set
accordingly. Refer to “Setting the Wake-On-
Keyboard/Mouse Function” in chapter 3 for
more information.
Warning:
1. If JP1 was previously enabled with a pass-
word set in the “KB Power On Password”
field, and now you wish to disable the
keyboard password function, make sure to
set the “Keyboard/Mouse Power On” field
to Disabled prior to setting JP1 to disabled.
You will not be able to boot up the system if you fail to do so.
2. The power button will not function once a keyboard password has been
set in the “KB Power On Password” field of the Integrated Peripherals
submenu. You must type the correct password to power-on the system.
3. If you are using the (1) Suspend to RAM, (2) Wake-On-Keyboard/Mouse
and (3) Wake-On-LAN functions all at the same time, the 5VSB power
source of your power supply must support a minimum of
≥
1A. A
≥
720mA 5VSB power source is sufficient if you are using only one or two
of these functions.
Cavalier JP1 - Réveil-sur-Clavier/Réveil-sur-Souris
Pour utiliser le clavier ou la PS/2 souris pour allumer le système, veuillez suivre
les étapes ci-dessous.
1. Positionnez JP1 sur 2-3 On - activé.
2. “Keyboard/Mouse Power On” dans le sous menu de Integrated Peripherals
du BIOS doit être paramétré en rapport. Reportez vous à “Activer la
Fonction Réveil-Sur-Clavier/Souris” dans le Chapitre 3 pour plus
d’informations.
English
Français
1-2 On: Disable
(default)
3
1
2
2-3 On: Enable
3
1
2