2
28
Hardware Installation
W
2.5.3 Universal Serial Bus Ports
USB 2
USB 1
1
2
7
8
2
9
10
1
1
2
9
10
W
1
VCC
-Data
+Data
Ground
Key
VCC
-Data
+Data
Ground
Ground
2
10
9
USB 5-6
USB 3-4
The system board is equipped with two onboard USB 2.0/1.1 ports
(Black).
J13 (USB 3-4) and J14 (USB 5-6) allow you to connect 4 additional
USB 2.0/1.1 ports. The additional USB ports, which are mounted on
a card-edge brackets, will be provided as options. If you want to use
the optional USB ports, install the card-edge bracket to the system
chassis then inser t the connector that is attached to the USB port
cables to J13 or J14.
BIOS Setting
Enable or disable the onboard USB in the Integrated Peripherals
submenu (“VIA OnChip PCI Device” section) of the BIOS. Refer to
chapter 3 for more information.
If you are using a USB 2.0 device, you must enable the USB 2.0
function in the same BIOS submenu mentioned above.
