62
3
Award BIOS Setup Utility
(default) to 4, which primarily differ in timing. When Auto is se-
lected, the BIOS will select the best available mode after checking
your drive.
Auto
The BIOS will automatically set the system ac-
cording to your hard disk drive’s timing.
Mode 0-4
You can select a mode that matches your hard
disk drive’s timing. Caution: Do not use the
wrong setting or you will have drive errors.
IDE Primary Master/Slave UDMA and IDE Secondary Master/Slave
UDMA
These fields allow you to set the Ultra DMA in use. When Auto
is selected, the BIOS will select the best available option after
checking your hard drive or CD-ROM.
Auto
The BIOS will automatically detect the settings for
you.
Disabled
The BIOS will not detect these categories.
IDE HDD Block Mode
Enabled
The IDE HDD uses the block mode. The system
BIOS will check the hard disk drive for the maxi-
mum block size the system can transfer. The block
size will depend on the type of hard disk drive.
Disabled
The IDE HDD uses the standard mode.
VIA OnChip PCI Device
Move the cursor to this field and press <Enter>. The following fields
will appear.
USB 2.0 Support
If you are using USB 2.0, this field must be set to Enabled.
VIA-3058 AC97 Audio
Auto
Select this option when using the onboard audio
codec.
Disabled
Select this option when using a PCI sound card.
