2
22
Hardware Installation
2.4.1 Jumper Settings for Clearing CMOS Data
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the keyboard, supervisor or user password.
c) You are unable to boot-up the computer system because the proc-
essor’s bus clock was incorrectly set in the BIOS.
you can reconfigure the system with the default values stored in the
ROM BIOS.
To load the default values stored in the ROM BIOS, please follow
the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP3 pins 2 and 3 to On. Wait for a few seconds and set JP3
back to its default setting, pins 1 and 2 On.
3. Plug the power cord and power-on the system.
1
2
7
8
2
9
10
1
1
2
9
10
3
1 2
3
1 2
2-3 On:
Clear CMOS
1-2 On: Normal
(default)
X
JP3
2.4 Jumper Settings
