www.dfi .com
34
Chapter 3 BIOS Setup
Chapter 3
Audio Configuration
This section configures the audio settings.
Audio Controller
Control the detection of the high-definition audio device.
Disabled
HD Audio will be disabled.
Enabled
HD Audio will be enabled.
Enable/Disable HD-Audio
Support
Audio Controller
Advanced
F1
Help
↑
/
↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←
/
→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
<Enabled>
SATA Configuration
This section configures the SATA controller.
Enables or Disables the
Chipset SATA Controller.
SATA Controller
SATA Mode Selection
SATA Speed Selection
SATA Port 0
SATA Port 0
Hot Plug
SATA Port 1
SATA Port 1
Hot Plug
Advanced
F1
Help
↑
/
↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←
/
→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
<Enabled>
<AHCI>
<Gen3>
[Not Installed]
<Enabled>
<Disabled>
[Not Installed]
<Enabled>
<Disabled>
SATA Controller
This field is used to enable or disable the Serial ATA controller.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI Mode
This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Controller
Interface).
SATA Speed Selection
Select Serial ATA controller(s) speed from Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s) or Gen 3
(6 Gbit/s).
SATA Port 0 and 1/Hot Plug
Enable or disable each Serial ATA port and its hot plug function.
