www.dfi .com
9
Chapter 2 Hardware Installation
Chapter 2
System Memory
Features
•
Two 204-pin SODIMM up to 8GB
•
Dual Channel DDR3L 1867MHz
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk drives, add-in
boards, and other components. Perform installation procedures at an ESD workstation
only. If such a station is not available, you can provide some ESD protection by wear-
ing an antistatic wrist strap and attaching it to a metal part of the system chassis. If
a wrist strap is unavailable, establish and maintain contact with the system chassis
throughout any procedures requiring ESD protection.
Important:
When the Standby Power LED lights red, it indicates that there is power on the sys-
tem board. Power-off the PC then unplug the power cord prior to installing any de-
vices. Failure to do so will cause severe damage to the motherboard and components.
2
DDR3L_1
DDR3L_2
Standby
Power LED
Mechanical Diagram
86.99
16.03
31.07
48.02
65.04
82.94
103.56
124
.99
133.00
157
.32
163.65
6.35
0
10.16
22.86
24.69
52.31
89.76
93.31
98.00
113.91
154.94
159.84
0
12.01
68.51
109.51
157
.48
157
.7
4
