www.dfi .com
22
Chapter 2 Hardware Installation
Chapter 2
Cooling Fan Connectors
The fan connectors are used to connect cooling fans. The cooling fans will provide adequate
airflow throughout the chassis to prevent overheating the CPU and system board components.
BIOS Setting
The Advanced menu (“SIO NUVOTON6116D” submenu) of the BIOS will display the current
speed of the cooling fans. Refer to the chapter 3 for more information.
2
1
3
FAN IN
12V
Ground
S
ystem Fan 2
1
3
FAN IN
12V
Ground
Front Panel Connector
HD-LED
RESET
PWR-LED
ATX-SW
11
12
2 1
HD-LED - Hard Drive LED
This LED will light when the hard drive is being accessed.
RESET - Reset Switch
This switch allows you to reboot without having to power off the system.
ATX-SW - Power Switch
This switch is used to power on or off the system.
PWR-LED - Power/Standby LED
When the system’s power is on, this LED will light. When the system is in the S1 (POS - Power
On Suspend) state, it will blink every second. When the system is in the S3 (STR - Suspend To
RAM) state, it will blink every 4 seconds.
Pin Function
Pin Function
HD-LED
3
3V3
PWR-LED
2
3V3SB
5
HDD_LED
4
3V3SB
RESET
7
GND
6
Power_LED
9
Reset
ATX-SW
8
GND
11 NC
10
Power_Button
2
Front
Panel
System Fan 1
