72
3
BIOS Setup
3.1.5.8 Soft-Off by PWR-BTTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec.
Regardless of whether the Power Management
function is enabled or disabled, if the power button
is pushed and released in less than 4 sec, the
system enters the Suspend mode. The purpose of
this function is to prevent the system from powering
off in case you accidentally “hit” or pushed the
power button. Push and release again in less than 4
sec to restore. Pushing the power button for more
than 4 seconds will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
3.1.5.9 PWR Lost Resume State
Keep Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power
button to power-on the system.
Turn On
When power returns after an AC power failure, the
system will automatically power-on.
Last State
When power returns after an AC power failure, the
system will return to the state where you left off
before power failure occurs. If the system’s power is
off when AC power failure occurs, it will remain off
when power returns. If the system’s power is on
when AC power failure occurs, the system will
power-on when power returns.
