31
2
Hardware Installation
2.5.4 S/PDIF
The system board is equipped with an onboard S/PDIF-in RCA
jack (red) and a S/PDIF-out RCA jack (yellow) at locations CN2
and CN3 respectively.
The S/PDIF connector at location J3 is for optical S/PDIF cable
connection. Connect the optical audio cable connector of your
S/PDIF module to J3. Make sure pin 1 of the audio cable connec-
tor is aligned with pin 1 of J3.
DO NOT use RCA S/PDIF and optical S/PDIF at the same time.
S/PDIF-in
W
S/PDIF-out
W
J3
1
5
SPDIF in
GND
SPDIF out
Key
+5V
