-12-
▪
When tightening the screws, make sure they are at a straight angle from the
battery module terminals to avoid damage to the nuts inside.
▪
Assemble the screws using a Phillips-head within the fastening torque of less
than 8.0 Nm (79.88 kgf/cm).
▪
The power terminals, such as “+,” “-,” of the module are covered with the
protecting cover to guard against a short circuit (Shown in Figure 5-1).
▪
You must remove the insulation cover prior to connecting and reattach the
insulation cover immediately after connecting.
Figure 5-1: Install the Grounding Wire
Step 1 Wear the protective gloves.
Step 2 Install the battery ground cable.
